Sony STR-DN1040 - Manual (Page 109)

109 US
Usin
g the
Remote Con
tro
l
• If the RM SET UP button flashes 5 times
in quick succession while entering the
numeric code, an error has occurred.
Start again from step 1.
Use the numeric codes in the tables below
to program non-Sony equipment and also
Sony equipment that the remote control is
normally unable to control. Since the signal
from the remote control received by the
equipment differs by its model and the
year, more than one numeric code may be
assigned to the equipment. If you fail to
program your remote control using one of
the codes, try using other codes.
• The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your equipment will not
respond to some or all of the codes.
• All of the input buttons on this remote control
may not be available when used with your
particular equipment.
To control a CD player
To control a DAT deck
To control a tape deck
To control an MD deck
To control an HDD recorder
To control a Blu-ray Disc
player/recorder
The numeric codes
corresponding to the
equipment and the
maker of the equipment
Notes
Maker Code(s)
SONY 101, 102, 103
DENON 104, 123
JVC 105, 106, 107
KENWOOD 108, 109, 110
MAGNAVOX 111, 116
MARANTZ 116
ONKYO 112, 113, 114
PANASONIC 115
PHILIPS 116
PIONEER 117
TECHNICS 115, 118, 119
YAMAHA 120, 121, 122
Maker Code(s)
SONY 203
PIONEER 219
Maker Code(s)
SONY 201, 202
DENON 204, 205
KENWOOD 206, 207, 208, 209
NAKAMICHI 210
PANASONIC 216
PHILIPS 211, 212
PIONEER 213, 214
TECHNICS 215, 216
YAMAHA 217, 218
Maker Code(s)
SONY 301
DENON 302
JVC 303
KENWOOD 304
Maker Code(s)
SONY 307, 308, 309
Maker Code(s)
SONY 310, 311, 312
PANASONIC 335
SAMSUNG 336
LG 337