Sony NEX-VG30H - Manual (Page 77)

Table of C
on
ten
ts
Sear
ch image
Inde
x
US
Histogram
You can display a histogram (graphic
display of the distribution of tones within
an image), to guide you when adjusting
exposure. The histogram will not be
recorded.
 Off
Does not display the histogram.
On
Displays the histogram with a line indicating
the brightness level 100.
On[Zebra Point]
Displays the histogram with lines indicating
the brightness level set with [Zebra] () and
the brightness level 100 ().
8 0
Tips
The left area of the histogram represents darker
areas of the picture, while the right represents
brighter areas.
Camera Data Display
When you set this function to [On], you
can display the iris, gain (ISO) and shutter
speed settings on the screen. The default
setting is [On].


Tips
The settings appear on the screen during the
manual adjustment regardless of the settings of
this function.
indicates that the settings are automatically
adjusted values (p. 48).
Audio Level Display
You can select whether or not to display the
audio level meter.
 On
Displays the audio level meter.
Off
Does not display the audio level meter.
Tips
When [Audio Mode] is set to [2ch Stereo], the 2
(left and right) audio level meters on the upper
level move.
AF Micro Adjustment
When you use the LA-EA2 (sold separately)
and an A-mount lens (sold separately), fine
focus adjustment is possible. Perform this
operation only when needed. Note that
you may not be able to properly focus on a
subject if you have made a poor adjustment.
 On/Off
When set to [On], registers the adjustment
value for an attached lens and adjusts the
focus by applying the registered value (default
setting is [Off]).
Amount
Sets the adjustment value between –20 to +20
for the attached lens.
Clear All
Clears the values of all the registered lenses.





Iris value
Gain (ISO)
Shutter speed value
Pix
els
Darker
Brightness
Brighter