Sony DCR-SR67 - Manual (Page 8)

US
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
Supplied items
The numbers in ( ) are the supplied
quantity.

AC Adaptor (1)

Power cord (Mains lead) (1)

A/V connecting cable (1) 

USB cable (1) 

Rechargeable battery pack
Only for DCR-SR47/SR48/SR67: NP-FH30 (1)
Only for DCR-SR87: NP-FH50 (1)

CD-ROM “Handycam Application
Software” (1) (p. 25)
“PMB” (software) including “PMB Guide”
“Handycam Handbook” (PDF)

“Operating Guide” (This manual) (1)
See page 39 for “Memory Stick” media you can
use with this camcorder.





Notes on use
Using the camcorder
The camcorder is not dustproofed, dripproofed
or waterproofed. See “Precautions” (p. 49).
Do not do any of the following when the
(Movie)/ (Photo) mode lamp (p. 15) or
the ACCESS/access lamp (p. 13, 39) are lit or
flashing. Otherwise, the recording media may
be damaged, recorded images may be lost or
other malfunctions could occur.
ejecting “Memory Stick PRO Duo” media
removing the battery pack or AC Adaptor
from the camcorder
Do not apply shock or vibration to the
camcorder. The camcorder may not be able to
record or play movies and photos.
Do not use the camcorder in very loud areas.
The camcorder may not be able to record or
play movies and photos.
When connecting your camcorder to another
device with a cable, be sure to insert the
connector plug in the correct way. Pushing the
plug forcibly into the terminal will damage the
terminal and may result in a malfunction of the
camcorder.
To protect the internal hard disk from shock
by dropping, the camcorder has drop sensor
function. When a drop occurs, or under a non-
gravity condition, the block noise made when
this function is activated by the camcorder may
also be recorded. If the drop sensor catches a
drop repeatedly, recording/playback may be
stopped.
When the temperature of the camcorder
becomes extremely high or extremely low, you
may not be able to record or play back on the
camcorder, due to the protection features of the
camcorder being activated in such situations. In
this case, a message appears on the LCD screen
(p. 47).
Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 5,000
meters (16,000 feet). Doing so may damage the
hard disk drive of the camcorder.









