Sony ICD-UX512BLK - Manual (Page 115)

115 GB
Tr
o
ub
les
h
o
ot
ing
File Damaged • You cannot play back or edit files, because the data of the selected
file is damaged.
Format Error • The IC recorder cannot be turned on using the computer because
there is no copy of the control file required for operation. Format
the IC recorder using the formatting function in the menu
(page 79). Do not use your computer to format the IC recorder.
Process Error • The IC recorder failed in memory access. Remove and then re-
insert the battery.
• Save a backup copy of your data and format the IC recorder using
the menu (page 79).
Stop and Reinsert Memory
Card • A memory card was inserted during recording or playback.
Remove the memory card and insert it while the IC recorder is in
the stop mode.
Set Date&Time • Set the clock; otherwise, you cannot set the alarm.
Track Marks are Full • You can set up to 98 track marks for a file. Cancel unwanted track
marks (page 60).
No File • The selected folder does not have any files. You cannot move a
file or set the alarm, etc., because of this.
No Track Marks • There are no track marks when you attempt to erase a track mark
or track marks, or divide a file at all the track mark positions.
Low Battery Level • You cannot format the memory or erase all the files in a folder
because of insufficient battery power. Replace the old LR03 (size
AAA) alkaline battery with a new one. Or charge the rechargeable
battery (page 11) or replace the old rechargeable battery with a
new one.
File Protected • The selected file is protected or is a “Read only” file. You cannot
erase it. Cancel the protection on the IC recorder or cancel “Read
only” on your computer to edit the file using the IC recorder
(page 65).
Message Cause/Remedy