Sony KDE-37XS955 - Manual (Page 38)

36
Setup
Satellite Receiver To connect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver’s satellite
input jack.
2
Use an A/V cable to connect the satellite receiver’s A/V output jacks to
the TV’s A/V input jacks (VIDEO 1 or 3).
3
Connect the 75-ohm coaxial cable (not supplied) from your cable or
antenna to the TV’s CABLE or VHF/UHF input jack.
4
Run the Auto Setup program, as described in “Setting Up the Channel
List” on page 53.
Using S VIDEO jacks? See page 29.
VHF/UHF CABLE
R-AUDIO -L
VIDEO
VIDEO IN 1
3
(MONO)
S VIDEO S VIDEO
Rear of TV
A/V cable
Satellite Receiver
CATV
cable 75-ohm
coaxial
cable
Satellite
antenna
cable