Sony HDR-PJ275 - Manual (Page 10)

GB
10
• Turn off your camcorder before you remove the battery pack.

Charging the battery using your computer
Turn off your camcorder and connect the camcorder to a running
computer using the Built-in USB Cable.

To use your camcorder connected to the wall outlet
(wall socket)
Connect the camcorder to the wall outlet (wall socket) in the same
way as “Charging the battery pack.”
• Insert the battery pack to the camcorder.
• The battery pack may be consumed even if the camcorder is connected
to the wall outlet (wall socket).
6
Connect the AC Adaptor and the camcorder with the
USB connection support cable, and connect the AC
Adaptor to the wall outlet (wall socket).
• The POWER/CHG (charge) lamp turns orange.
• The POWER/CHG (charge) lamp turns off when the battery pack is
fully charged. Disconnect the USB connection support cable from the
camcorder.
• The shape of the AC Adaptor differs depending on the countries/
regions.
Built-in USB Cable
USB connection
support cable
AC Adaptor
Wall outlet (wall socket)