Sony PEG-SJ30 - Manual (Page 70)

70
You can install applications for your CLIÉ handheld into the Memory
Stick media without performing HotSync operation, if you use the
Memory Stick Import/Export applications.
1
Connect your CLIÉ handheld to the computer with the
Memory Stick Export software installed, using the
supplied USB cable.
2
Insert the Memory Stick media into your CLIÉ handheld.
3
On the Application Launcher screen, rotate the Jog Dial
navigator to select MS Import and then press the Jog
Dial navigator. Or, tap the MS Import icon on the
Application Launcher screen.
The Memory Stick Import application starts.
Note
The CLIÉ handheld may not operate when there is not enough
memory available. Be sure to maintain sufficient memory space.
4
Drag and drop add-on application files (.prc or .pdb) to
the MS Export shortcut icon on your Windows desktop.
These files are automatically copied to the appropriate folders.
If the application file type could not be recognized by the
Memory Stick Export
The Entry Form dialog box appears.
In this case, enter the application name and destination folder to
which the application will be copied.
5
When you finish, tap Disconnect or tap Home .
Note
Do not remove the Memory Stick media while your CLIÉ handheld is connected
to your computer.
If your computer is Windows 2000/Windows Me
A warning message appears when you tap Disconnect on your CLIÉ
handheld.
Click OK, and then continue operations.
Installing CLIÉ applications using
Memory Stick Import/Export