beautypg.com

Sony RDR-HX715 User Manual

Page 95

background image

95

Set
tings
a

nd
Adj
us
tm

e

nt

s

• DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.

b

Note

When HDMI output is performed to equipment not
compatible with DTS signals, the signals will not be
output regardless of the “DTS” setting.

• 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.

b

Notes

• “48kHz/96kHz PCM” setting has no effect when audio

signals are output from the LINE OUT 2 (R-AUDIO-
L) jacks. If the sampling frequency is 96kHz, signals
are simply converted to 96kHz analog signals and
output.

• If the HDMI OUT jack is connected to equipment not

compatible with 96 kHz signals, 48kHz PCM will be
automatically output even when you select “96kHz/
24bit.”

• Audio(HDMI)
Selects the type of audio signal output from the
HDMI OUT jack.

b

Notes

• A loud noise (or no sound) will be output if you connect

the recorder to a TV that is not compatible with
DOLBY DIGITAL/DTS signals and “Auto” is
selected. In this case, select “PCM.”

• Set “Digital Out” to “On” when outputting compressed

audio signals to an HDMI compatible TV.

On

Select this when the recorder is
connected to an audio component
with a built-in DTS decoder.

Off

Select this when the recorder is
connected to an audio component
without a built-in DTS decoder.

48kHz/
16bit

The DVD video audio signal is
converted to 48kHz/16bit and
output.

96kHz/
24bit

All signals containing 96kHz/24bit
are output without conversion.
However, the signals are output at
48kHz/16bit if copyright-protected
signals are contained.

Auto

Normally, select this. Outputs the
optimum audio signal that can be
received by the TV based on the
“Digital Out” setting (page 94).

PCM

Converts Dolby Digital or 96 kHz
PCM signals to 48 kHz/16 bit
PCM.