Sony VPCEE32FX - Manual (Page 2)

VPCEE Series Hard Disk Drive
Replacement Instructions
P/N 989201980 Rev. B 2/3
Step 4. Grasp the top of the Hard Drive
Door with your fingers and slide in a
downward motion to remove the door.
Step 5. Using the enclosed magnetic
screwdriver, remove the screw securing
the Hard Drive Assembly. Put aside the
Hard Drive Screw to re-secure the
Hard Drive later in the procedure. Step 6. Disconnect the Hard Drive by
pulling the black plastic tab to the Left.
Step 7. Carefully lift the Hard Drive
straight up from the unit to remove. Step 8. Remove the four (4) screws that
secure the Bracket to the Hard Drive.
Put aside the Bracket Screws to
secure the Bracket to the Hard Dive
later in the procedure. Step 9. Locate the clips on the side of
the Hard Drive. Slide the Hard Drive
away from the clips to remove it from
the Bracket.
Step 12. Place the Bracket over the
New Hard Drive and slide Right,
making sure the clips slide over the
Hard Drive.
Step 10. Set the Old Hard Drive aside. Step 11. Prepare the New Hard Drive
for assembly.
Hard Drive Disassembly
(Steps 8-13)
Lift To Remove
Old Hard Drive
DriveDrive
New Hard Drive