Sony PCG-FX270K - Manual (Page 21)

Using PC Cards
21
4 Push the PC Card slot gently into the port. The PC Card is automatically
detected by your system. The
Unplug or Eject Hardware icon appears in
the taskbar.
To remove a PC Card
1 Double-click in the taskbar. The “Unplug or Eject Hardware” dialog
box appears.
2 Select the hardware device you wish to remove.
3 Click Stop. In the “Stop a Hardware device” dialog box, confirm that the
device can be safely removed from the system.
4 Click OK. The message, “PC Card can now be safely removed from the
system” appears.
5 Click OK again and click Close.
6 Push the Release button. The Release button pops out.
7 Push the Release button a second time. The PC Card pops out. Gently grasp
the card and pull it out of the slot.
Inserting a PC Card
Do not force a PC Card into the slot as this may damage the connector pins.
Touching the head of the PC Card will not cause damage to the connector
pins, but damage can occur if the head of the PC Card is sticking out of the
notebook while the unit is being transported.
✍
If your notebook is turned off, you do not have to follow these instructions.
PC Card
Insert with the
arrow facing toward
the slot