Sony PCV-E203 - Manual (Page 85)

BIOS Setup Options 77
I/O Device Configuration
Serial port A: [Auto]
Disabled
Enabled
Base I/O address
*
: [3F8]
2F8
3E8
2E8
Interrupt*: [IRQ 4]
IRQ 3
Parallel port: [Auto]
Disabled
Enabled
Mode
†
: [ECP]
Output only
Bi-directional
EPP
Base I/O address ‡ : [378]
278
3BC
Interrupt‡: [IRQ 7]
IRQ 5
DMA channel
**
: [DMA 3]
DMA 1
Floppy disk controller: [Enabled]
Auto
Disabled
Base I/O address: [Primary]
Secondary
Large Disk Access Mode: [DOS]
Other
Local Bus IDE adapter: [Both]
Disabled
Primary
Secondary
Sound: [Enabled]
Disabled
* This option appears only if the port is set to Enabled.
† This option appears only if the port is set to Auto or Enabled.
‡ This option appears only if the port is set to Enabled and Mode is not set to EPP.
** This option appears only if the port is set to Enabled and Mode is set to ECP.