Sony VPCS13AGX - Manual (Page 2)

VPCS1 Series Hard Disk Drive
Replacement Instructions
P/N 989201342 Rev. B 2/3
Step 4. Slide the Hard Drive Door away
from the unit, and lift to remove. Step 5. Using the enclosed magnetic
screwdriver, remove the three (3)
screws
securing the Hard Drive
Assembly. Put aside the Hard Drive
Screws to re-secure the Hard Drive
later in the procedure.
Step 6. Disconnect the Hard Drive by
grasping the Hard Drive Bracket (metal)
and sliding it away from the unit.
Step 7. Carefully lift the Hard Drive
from the unit to remove.
Step 8. Remove the four (4) screws
securing the bracket to the Hard Drive.
Step 9. Set the old Hard Drive aside.
Put aside the Bracket Screws to re-
secure the Bracket later in the
procedure.
Step 12. Re-install the four (4) Hard
Drive Bracket screws to secure the
Hard Drive Bracket to the new Hard
Drive.
Step 10. Prepare the new Hard Drive
for assembly. Step 11. Place the Hard Drive bracket
over the new Hard Drive.
Hard Drive Bracket Transfer
(Steps 8-12)
Lift To Remove
Old Hard Drive
New Hard Drive