Sony VGN-B100P - Manual (Page 102)

Disconnecting a Port Replicator
Disconnecting a port replicator when the computer is in a power saving mode (Standby or Hibernate) or the battery power
is low may result in data loss or a computer malfunction. You can disconnect a port replicator when the computer is on or
off.
When the battery is low, turn off the computer before you disconnect a port replicator.
To disconnect a port replicator
1. Close active programs to prevent data loss.
2. Turn off the computer, and disconnect all attached devices.
3. Pull the release latches on each side of the port replicator to release the computer.
Releasing the Com puter from a Port Replicator
4. Lift the computer up and away from the port replicator.
Lifting the Com puter from the Port Replicator
Page 102