Sony VGN-AR270P User Manual
Page 2
VGN-AR Series Optical Disk Drive
Replacement Instructions
P/N 994641300
Rev. C
2/2
Step 4. Remove the ODD Bay.
Using the enclosed magnetic
screwdriver, loosen up the three (3)
screws securing the ODD Bay.
Step 5. To initiate the removal of the
ODD Bay, pull slightly the ODD door
as shown in the picture.
Step 6. With even force slide out
the ODD as shown.
Some force
may be required to unlock the ODD
from the connector.
Step 7. Hold the new ODD Bay by
the edges and align it with the
opening.
IMPORTANT! Install the
new ODD in the correct position.
Step 8. With an even force slide in
the new ODD Bay.
Step 9. Make sure the new ODD
Bay is seating flush on the edge of
the computer.
Step 10.
IMPORTANT! Make sure
the three (3) mounting holes are
aligned properly.
Step 11. Reinstall the three (3)
previously removed screws.
Step 12. Reinstall the battery pack.
Return the old ODD to Sony
following the included shipping
instructions.