I cannot start the hotsync, Operation by pressing the, Hotsync button on the cradle – Sony PEG-NX80V User Manual

Page 24: I cannot cancel the hotsync, Operation midway, It takes a long time to complete the hotsync, Operation, Operation is performed

For particular problems regarding HotSync

operations, refer

to the following.

I cannot start the HotSync

operation by pressing the

HotSync button on the cradle

B Ensure

Local

and

Cradle/Cable

are selected in the

HotSync

screen.

B Perform a soft reset by pressing the RESET button.

For details, refer to “Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ handheld” in the “Read This First (Operating Instructions).”

I cannot cancel the HotSync

operation midway

B You may not be able to stop the HotSync

operation by tapping

Cancel

for a few seconds after you start the USB HotSync

operation. Try again

after a while.

B If you remove your CLIÉ handheld from the Cradle or disconnect the AC

power adapter during the HotSync

operation, the HotSync

operation

may not perform correctly.
In this case, perform a soft reset.

B If you cannot stop the HotSync

operation even by tapping

Cancel

perform a soft reset.

For details, refer to “Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ handheld” in the “Read This First (Operating Instructions).”

It takes a long time to complete the HotSync

operation

B Depending on the application you are using, it may require time to

complete the HotSync

operation because of large data/file sizes.

Data cannot be synchronized with some applications
when the HotSync

operation is performed

B The user name for the Palm™ Desktop for CLIÉ software does not match

the one for your CLIÉ handheld.
In the Palm™ Desktop for CLIÉ software, select the user name
corresponding to your CLIÉ handheld user name.

This manual is related to the following products: