The lcd display cannot be viewed properly, My clié handheld does not produce any sounds – Sony PEG-NX80V User Manual
Page 16

16
B Adjust the volume settings in the
Adjust Volume
screen displayed by
tapping the
icon in the status bar.
Tip
If the
Muting
mode is selected in the
Adjust Volume
screen, all sounds, including Audio,
are muted.
b
For details, refer to “CLIÉ™ handheld components: Status Bar” in the “Read This First
(Operating Instructions).”
The backlight does not turn on when I adjust the
brightness level
B If the brightness is set to the lowest level, the display may be illegible, but
this is not a malfunction.
Tip
You can adjust the brightness level in the
Adjust Brightness
screen displayed by tapping
the Brightness Adjustment
icon at the bottom left of the Silk screen.
The LCD display cannot be viewed properly
B Depending upon the angle of vision, the brightness may be uneven, but this
is not a malfunction. You can adjust the brightness level in the
Adjust
Brightness
screen displayed by tapping the Brightness Adjustment
icon at the bottom left of the Silk screen. If the backlight is set to off, you can
turn it on by sliding down the POWER/HOLD switch and hold it for more
than two seconds.
Tip
You can switch the backlight on and off by pressing the L key while pressing the Ctrl key on
the hardware keyboard.
My CLIÉ handheld does not produce any sounds