Sony STR-DN1020 - Manual (Page 44)

44 GB
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STR-
DN1020-CEL.fm masterpage: Left
STR-DN1020
4-273-051-14(1)
7
Press V/v repeatedly to select
“Do Not Use”, then press .
The confirmation display appears on the
TV screen.
8
Press V/v repeatedly to select
“OK”, then press .
“Connecting” appears on the TV screen.
“Complete!” appears after the network
settings are completed, then press
.
The display returns to the Network
Settings menu. (Depending on the
network environment, the network
settings may take some time.)
If “No Connection” is displayed, perform
the process referring to “Network
Settings menu” (page 99).
9
Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 69).
To set the network settings
manually
See “To set the IP address manually”
(page 99) or “To set the Proxy server
manually” (page 99).
Tip
When checking the network settings, see “To check
the network information” (page 99).
Guide to on-screen
display operation
You can display the menu of the receiver on
the TV screen and select the function you want
to use on the TV screen by pressing
V/v/B/b
and on the remote control.
To display the menu of the receiver on the TV
screen, make sure that the receiver is in “GUI
MODE” following the steps in “To turn “GUI
MODE” on and off” (page 45).
1
Switch the input of the TV so
that an image of the menu is
displayed.
2
Press MENU.
The menu is displayed on the TV screen.
Using the menu
V/v/B/b,
GUI MODE
MENU
TOOLS/
OPTIONS RETURN/
EXIT O