Cable and antenna – Sony KDF-55WF655 User Manual
Page 33
Setting Up the LCD Projection TV
33
Se
tting
Up the
LCD Pr
ojec
tion
TV
KDF-WE/WF655
2-059-370-12 (1)
Cable and Antenna
For best results, use this connection if you:
❑
Have a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable TV company.)
❑
Do not have a cable box or VCR. (If you have a cable box, see pages 34
to 35. If you have a VCR, see pages 39 and 40.)
Notes on Using This Connection
Before connecting a
cable box, see “Using
Antenna and CATV cable
Cable Type
Connect As Shown
Cable TV
(CATV) and
Antenna
To Do This...
Do This ...
Switch
the LCD projection
TV’s input between the cable
and antenna
Press
ANT
to switch back and forth between the
LCD projection TV’s VHF/UHF and CABLE
inputs.
✍
For optimum picture quality, a 75-ohm coaxial cable antenna connection
is highly recommended. Radio waves and other interference can easily
affect a 300-ohm twin lead cable, resulting in signal deterioration. If you
use a 300-ohm twin lead cable, keep it as far away as possible from the
LCD projection TV.
✍
Do not use an indoor antenna, which is especially susceptible to radio
noise.
Antenna cable
CATV cable