Sony KDF-55WF655 - Manual (Page 19)

Introducing the Sony LCD Projection TV
19
Intr
oduc
ing
the So
n
y
LCD Pr
ojec
tion
TV
KDF-WE/WF655
2-059-370-12 (1)
Place back the lamp cover, then tighten the screw.
7
Reattach the front panel securely.
8
Tightly screw the side panel in its place.
✍
If the screw of the lamp cover is slanted, the lamp may not light up
properly. In such a case, take out the screw and reinsert it straight
into the screw hole, then tighten the screw completely (see page 126).
✍
If the lamp cover is not reattached securely, the self-diagnostic
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 126).
✍
Consult your Sony dealer for a Sony XL-2100U or XL-2100 (for
WE655 series) replacement lamp.
✍
Take great care when replacing the lamp or plugging in/unplugging
the connecting cords. Rough handling may cause the LCD
projection TV to fall, damaging the TV, the TV stand and/or the floor.
This illustration is for KDF-50WE655.
The screw for KDF-42WE655 is more
to the inside.
(Continued)