Sony PCG-GR300K - Manual (Page 193)

Troubleshooting the Printer
I cannot print.
 The default setting for the printer port mode is correct for most printers. If you cannot print, try changing the printer
port mode. From the Control Panel, select Sony Notebook Setup, and then the Printer tab. If the printer port mode
is set to ECP, change it to bi-directional. If the printer port mode is set to bi-directional, change it to ECP. See
Displaying the Sony Notebook Setup Screen for details on using Sony Notebook Setup.
 Your connected printer may not function after the notebook resumes from a power saving mode. If this occurs,
follow these steps to reset the printer connection:
1. Click Start, point to Settings, and then select Printer.
2. Right-click the icon of the printer that is not functioning, and then select Properties to open the
Properties window.
3. Click OK to close the Properties window. The printer should now function properly.
Page 193