Sony PCG-FRV35 - Manual (Page 2)

PCG-FRV Series Hard Disk Drive
Replacement Instructions
P/N T99860133 Rev. C 2/2
Step 7 . Gently remove the drive as shown. CAUTION!
Be careful not to lift the drive before releasing the pins from the
socket as instructed in Step 6!
Step 8 . Place the new drive flat in the opening. Slide the drive
into position in the direction of the arrows, as shown above. Make
sure both rows of pins have been inserted into the socket.
Step 4 . Remove hard
drive access door as
shown and set aside.
Step 9 . Using the
enclosed magnetic
screwdriver, reinstall the
four (4) previously removed
screws.
CAUTION! Be careful
not to drop screws into the
unit, and to use the correct
screws, as shown. Do not
over tighten the screws!
Step 10 . Reinstall the hard
drive access door and screw.
Power on your computer and
continue with the recovery
process by following the
instructions described on the
back of the recovery disk’s
case.
Return the old HDD Bay to
Sony following the included
shipping instructions.
Step 6 . Gently slide the drive in
the direction of the arrows to
release the pins from the socket.
X
Step 5 . Using the enclosed magnetic screwdriver, remove
the four (4) screws as shown above. CAUTION! Be careful
not to drop screws into the unit.