Sony PCG-FX210 - Manual (Page 64)

Change to Current Document Title
64
Connecting to a Local Area Network (LAN)
You can connect your computer to 10BASE-T and 100BASE-TX-type networks.
For the detailed settings and devices needed to connect to a network, ask your
network administrator.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the (Ethernet
connector). Do not connect any other type of network cable or any telephone
line. Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
connector. To connect the unit to the network, contact your network
administrator.
Note that if you enable Wake on LAN, the power saving mode will be switched
to Standby mode.
Ethernet
connector