Sony VPCF215FX - Manual (Page 2)

VPCF2 Series Optical Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N 989202612 Rev. B 2/3
Step 4. Using the enclosed magnetic
screwdriver, remove the two (2) screws
securing the ODD Bay.
Put aside the ODD Bay screws to re-
secure the ODD Bay later in the
procedure.
Step 5. Insert your fingers in the space
between the ODD and the unit
. Gently
slide the ODD away from the unit.
Step 6. Carefully remove the ODD
Assembly from the unit.
ODD Disassembly (Steps 7-9)
Step 7. Identify the four (4) screws
which secure the ODD Brackets to the
ODD.
Step 8. Remove the screws & brackets.
Put the ODD Brackets and screws
aside for transfer to the new ODD.
Step 9. Arrange the Brackets &
screws as shown above and then set
the old ODD aside.
Step 11. Align the tabs on the Bezel
with the tab holes located on the
ODD. Carefully press the Bezel into
place.
ODD Assembly (Steps 10-13)
Step 10. Take the new ODD and Bezel
provided in the CRU kit and prepare for
assembly.
NOTE: Identify tabs on the Bezel and
tab holes located on the ODD.