Sony DEV-5 - Manual (Page 69)

Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
How to check the triangulating
information
Color of the satellites/
triangulating gauge
Status
/ (black)
No signal, but orbit
information for the
satellite is available.
/ (gray)
33 % of the satellite orbit
information has been
obtained.
/ (brown)
66 % of the satellite orbit
information has been
obtained.
/ (ocher)
99 % of the satellite orbit
information has been
obtained.
/ (green)
Triangulating is completed
and the satellite is
currently being used.
If data on your current information
cannot be triangulated
This product starts the triangulating
priority mode. As this product turns
other functions off to search for satellites,
obtaining GPS information can take
priority.
To close the triangulating information
screen
Select and press Enter.
GPS Setting (DEV-
5/5K)
You can select whether this product
receives or does not receive GPS signals
(p. 31).
 On
Receives GPS signals.
Off
Does not receive GPS signals.
Notes
The location information will not be recorded
until triangulating is finished successfully after
you switch the [GPS Setting] to [On].
REC Lamp (Recording
lamp)
You can make the recording lamp on the
back of this product not to turn on.
 On
The camera recording lamp lights up.
Off
The camera recording lamp does not light up.
Beep
On
A melody sounds when you start/stop
recording, or operate buttons.
 Off
Cancels the melody.
A. Shut Off (Auto shut
off)
You can set this product to turn off
automatically when you do not operate this
product for more than about 5 minutes.
On
This product turns off automatically.
 Off
This product does not turn off
automatically.
Notes
When you connect this product to a wall outlet
(wall socket), this product does not turn off
automatically.



