Sony VPL-ES1 - Manual (Page 23)

23 GB
Projecting
Set
ting
Up and Pro
jec
ti
ng
Projecting
1
Plug the AC power cord into a wall outlet, then connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I / 1 key.
The ON/STANDBY indicator lights in green and the Intelligent Auto-setup
starts. The lens protector opens, and the powered tilt adjuster rises and stops at
the previously adjusted position.
3
Turn on the equipment connected to the projector.
Depending on the type of your computer, for example a notebook, or an all-in-
one LCD type, you may have to switch the computer to output to the projector
by pressing certain keys (e.g.,
, etc.), or by changing your
computer’s settings.
INPUT MENU PUSH
ENTER
TILT
ON/STANDBY indicators
Remote control detector
VGA LCD / / ,