Argus Camera DC3200 User Manual

Page 15

Note: The front LED light will blink red during the 10 second period

5. HALF / FULL: Indicate image resolution. See Buttons Description RES.

6. Rapid Fire: Take 3 continuous photos
• To activate Rapid Fire, turn Mode Dial to Record Mode
• Press the RES button until Rapid Fire icon appear on the status

LCD display.

• Press the Shutter button, you can take 3 continuous photos
Note: This function is available in resolution FULL* and HALF* only.
We recommend to de-activated the flash while using Rapid Fire

function due to the time required to re-charge the flash between photos.

Front LED indication :
Blinking

: Self-timer is started

Off

: Self-timer is not in use.

Default settings
Note: These are set upon installing batteries to power on the camera
Flash

: Off

Resolution

: FULL*

LCD monitor

: Off

LCD Brightness

: 0

Quick View

: Off

White Balance

: Auto

EV Compensate : 0
Light Frequency : 60Hz
Video

: NTSC

Slide show

: 3-second delay

Folder

: 100 01.01.00

Date/Time

: 01/01/00 12:00

Language

: English

Sound

: Off

Auto Power Off

: 1 minute

(For detailed settings please refer to the User’s Manual)

How to view the images
1. Playback on LCD Monitor

• Turn Mode Dial to Play mode, the last photo taken will be
displayed.
• See LCD Monitor Menu in Play Mode

2. Download to the Computer

• Don't connect camera to PC before drivers are installed. See Page17 to

25 Install camera drivers and software

• Be sure to save photos in the camera or CF card