Sony KDS-70R2000 - Manual (Page 34)

34 GB
AV Set-up menu
You can select the options listed below on the AV Set-
up menu. To select options in “Settings”, refer to
“Picture menu” (page 25).
AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
input signals from connected equipment that you do not want displayed on the
screen.
1
Press
F
/
f
to select the desired input source, then press .
2 Press
F
/
f
to select the desired option below, then press .
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
“Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” (page 36).
“Skip”: Skips an unnecessary input source.
AV3 Input Sets a signal to be input through the socket labelled / / 3 on the rear of
the TV.
“Auto”: Switches automatically among the signals of RGB input, S video input,
Composite video input depending on the input signal.
“RGB”: Inputs the RGB signal.
“S Video”: Inputs the S Video signal.
“Composite”: Inputs the Composite video signal.
AV7 Input Sets a signal to be input through the sockets labeled / / 7 on the front of
the TV.
“Auto”: Switches automatically between the component video sockets and the
composite video sockets depending on the cable connection.
“Component”: Activates the component video sockets.
“Composite”: Activates the composite video sockets.
Tip
When multiple cables are connected and “Auto” is selected, “Component”,
“Composite” will be activated in that order.
AV2 Output Sets a signal to be output through the socket labelled / 2 on the rear of the
TV. If you connect a VCR or other recording equipment to the / 2 socket,
you can then record from the equipment connected to other sockets of the TV.
“TV”: Outputs a broadcast.
“AV1”: Outputs signals from equipment connected to the
/ 1 socket.
“AV3”: Outputs signals from equipment connected to the / / 3 socket.
“AV7”: Outputs signals from equipment connected to the / 7 socket.
“Auto”: Outputs whatever is being viewed on the screen (except signals from the
/ 4, HDMI IN 5, HDMI IN 6 and PC IN RGB/ sockets).