Avocent 1000R - Manual (Page 69)

Appendices 63
These key combinations will work with the USB AVRIQ module (if your Sun
system comes with a USB port) as well as the Sun AVRIQ module. With the
exception of F12, these key combinations are not recognized by Microsoft
Windows. Using F12 performs a Windows key press.
When finished, press and hold Ctrl+Shift+Alt and then press the Scroll Lock
key to toggle Advanced Sun Key Emulation mode off.
Special considerations for Japanese and Korean Sun
USB keyboards (AVRIQ-USB modules only)
Japanese Sun USB and Korean Sun USB keyboards assign usage IDs for certain
keys that differ from standard USB usage IDs. If AVRIQ-USB modules are
attached to your Sun servers, the Han/Zen and Katakana/Hiragana keys on
Japanese Sun USB keyboards and Hangul and Hanja keys on Korean Sun USB
keyboards must be accessed using alternate keystrokes.
Due to these keyboard-specific differences, keyboard mapping inconsistencies
may be encountered when switching between servers using Sun AVRIQ
modules and servers using AVRIQ-USB modules. These keys function
normally if your Sun servers are attached to the AutoView 1000R/2000R
appliance using a Sun AVRIQ.
The following table lists the keyboard mapping that will take place when an
AVRIQ-USB is used in this setting.
PS/2-to-USB Keyboard Mappings
PS/2 USB Sun US Korean Sun Japanese Sun
Keyboard Usage ID Keyboard USB Keyboard USB Keyboard
Right-Alt ØxE6 AltGraph Hangul Katakana/Hiragana
Windows Øx65 Compose Hanja Compose
Application
Hangul Øx90 N/A N/A N/A
Hanja Øx91 N/A N/A N/A
Katakana/Hiragana Øx88 N/A N/A Han/Zen
Han/Zen Øx35 ` ~ ` ~ N/A