Asus Xeon 5U Rackmount Server AP1720-E1 - Manual (Page 54)

Chapter 2: Hardware setup 2-38
To re-install the HDD fan:
1. Re-connect the 3-pin fan cable to the fan
connector on the backplane.
3. Push the outer edge of the fan
cage sideways to fit it to the drive
cage. You hear a click when the
fan cage correctly fits in place.
Side tabs Outer side of fan cage Inner edge of drive cage
2. Hold the outer side of the HDD fan cage and hook the two side tabs to
the inner edge of the drive cage. Make sure that the system cables are
not caught up when you place the HDD fan.
4. Secure the fan cage with the
thumb screw.
Fan connector on
backplane (FAN1)