Asus Xeon 5U Rackmount Server AP1720-E1 - Manual (Page 37)

2-21 ASUS AP1720-E1 barebone server
3. Attach Rail 2 to the other side of the drive as shown. The rail end
should be on the side of the drive connectors.
Drive connectors
Hole 1 Hole 3
Rail end
5. Carefully insert the drive into a
bay on the front panel.
6. Push the drive all the way to the
depth of the bay until the rail locks
clicks, indicating that the drive is
securely in place.
4. Check the HDD jumper setting. Refer to the label pasted on the HDD
for the setting description. The setting “Cable Select” is recommended.