beautypg.com

1 important safety information, General safety – AEG LAVATHERM 57520 User Manual

Page 5

background image

Important Safety Information

5

1 Important Safety Information

The safety of AEG electrical appliances complies with the established
technical principles and statutory equipment safety regulations. Never-
theless, as manufacturer we have to draw your attention to the follow-
ing safety instructions.

General safety

• Repairs of the dryer may be carried out only by trained personnel.

Incompetently carried out repairs can entail considerable hazards for
the user. Please get in touch with our customer service or with an
authorised AEG dealer when repair is necessary.

• Before commencing operation please make sure that the nominal

voltage and type of supply specified on the type plate of the
appliance correspond to the actual nominal voltage and supply type
at the place of utilisation. The fuse rating is also specified on the type
plate.

• Never operate the dryer when the mains cable is damaged or when

the operator control mask, work plate or base shrouding are damaged
such that there is direct access to the interior of the appliance.

• Switch off the dryer before carrying out any cleaning, care and

maintenance tasks! You are quite safe if you disconnect the mains
plug from the power outlet or – if the electrical connection is
permanent – if you switch off the circuit breaker in the fusebox or
screw the fuse cartridge right out of its holder.

• Never pull on the cable to disconnect the mains plug from the power

outlet. Always grasp and pull out the plug.

• Don’t lean on the opened door; this could make the appliance fall

over.

• Don’t use a water jet to spray-down the appliance. Danger of electric

shock!

• The covering hood for the filament lamp bulb for drum illumination

must be screwed on.

• When closing the door, please check that the washing is not caught

in it.

• If you interrupt the drying process to take out laundry, bear in mind

that the laundry and the drum could be hot.

• Adaptors and extension cables must not be used. There is risk of fire

because of overheating!