AEG LAVATHERM 57520 - Manual (Page 27)

Something not working?
27
Something not working?
If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling an engineer.
Symptom Possible cause Solution
The tumble dryer will not start
The appliance is not
plugged in
Plug in the appliance
The fuse has blown Check the fuse
The
X/i START/PAUSE
button has not been
pressed
Press the
X/i START/
PAUSE button
No programme has been
selected Select the required
programme
The door is not properly
closed
Close the door
The results are unsatisfactory
The wrong programme
has been selected Select a different
programme
Fluff filter blocked Clean the fluff filter
Heat exchanger covered
with fluff
Clean the heat exchanger
The tumble dryer has
been overloaded
Observe the maximum
loads stated for each
programme
Laundry not sufficiently
spun prior to tumble
drying Ensure the wash load is
well spun before tumble
drying
The vent in the base of
the appliance is covered
Ensure the vent is clear
A residue may have
formed on the drum
interior, blocking the
sensors
Clean the inside of the
drum with white vinegar
The door cannot be closed
Fluff filter has not been
inserted correctly and/or
the filter lid not closed Replace the fluff filter
and ensure the filter lid is
closed