Karcher K 2-27 CCK - Manual (Page 8)

8 English
ƽ WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
Always test an inconspicuous area
before cleaning with high pressure.
 This nozzle features a 0º pencil jet
which rotates 360º for maximum dirt
cutting action, effectively increasing
cleaning performance up to 50%.
This nozzle combines the cleaning
performance of a 0º pencil jet with
the surface coverage of a wide angle
nozzle.
Not recommended for soft materi-
als, siding, painted surfaces,
decks or autos.
 Before cleaning any surface an in-
conspicuous area should be cleaned
to test spray pattern and distance for
maximum cleaning results.
 The Vario Power Spray Wand allows
you to adjust the cleaning pressure.
To clean at maximum pressure, the
wand must be positioned to the high
pressure setting (Max).
For reduced pressure turn the wand
collar in the "Min" direction.
To apply detergent, the wand must
be positioned to the low pressure
setting (Mix).
ƽ WARNING
Do not use the rim and bristle brush
on the clear coat finish of a vehicle.
These brushes are intended for tires,
unfinished metal or chrome finishes.
Detergents can only be applied at low
pressure.
 STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
 STEP 2:
One Gallon Ready to Use Instruc-
tions:
Fill a container with Kärcher deter-
gent. Place the filter end of detergent
siphon tube into the container.
USING THE ACCESSORIES
Dirtblaster®
Vario Power Spray Wand
Cleaning Kit
WORKING WITH
DETERGENTS