Karcher K 3-48 M Plus - Manual (Page 7)

English 7
 STEP 1:
Insert one end of the high pressure
hose tightly into the quick connect on
the unit, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
 STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
 STEP 3:
Install the supplied connector to the
unit’s water inlet.
 STEP 4:
Screw the supplied garden hose con-
nector on to the end of your garden
hose.
 STEP 5:
Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.
 STEP 6:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
OPERATING INSTRUCTIONS