beautypg.com

Water supply (cold water only), Hardware (included), Assembly instructions – Karcher G 3050 OHC User Manual

Page 5

background image

English 5

WATER SUPPLY (Cold Water Only)

CAUTION

When connecting to water supply mains, local

regulations of your municipal water company

must be observed. In some areas connecting

directly to public drinking water supply may

require a backfl ow prevention device. This is

to ensure that there is no feedback of chemi-

cals into the water supply. Use a water fi lter to

avoid potential damage from dirt in the water

supply.

■ Garden hose must be at least 5/8 inch

diameter.

■ Flow rate of water supply must not fall below

2.5 GPM (gallons per minute)

■ Flow rate can be determined by running the

water for one minute into an empty 5-gallon

container.

■ The water supply temperature must not ex-

ceed 104°F/40°C.

■ Never use the pressure washer to draw in

water contaminated with solvents, e.g. paint

thinners, gasoline, oil, etc.

■ Always prevent debris from being drawn into

the unit by using a clean water source. Use

additional water fi lter.

■ Do not operate pressure washer without the

water turned on.

Hardware (included)

Description

Purpose

Illustration

Qty

A

Knob

Joint Assembly

2

B

1/4" Bolt

Joint Assembly

2

C

Nylon Rivet

Gun Holder Assembly

4

D

Gun/Hose

Storage

Gun Holder Assembly

1

E

Nozzle Holder

Nozzle Holder Assembly

1

F

High Pressure

Hose

Spray Gun Assembly

1

G

Spray Gun

Spray Gun Assembly

1

ASSEMBLY INSTRUCTIONS