Karcher K 2-26 M Plus - Manual (Page 7)

English 7
 STEP 3:
1 Screw the supplied garden hose con-
nector on to the end of your garden
hose.
2 Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.
 STEP 4:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
 STEP 5:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
We recommend that you test the GFCI as
part of your startup procedure each time
you use your pressure washer. To learn
how to peform this test on your unit, visit
http://www.karcherresidential.com/
gfci_test.php for detailed instructions for
your type of GFCI.
ƽ WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may
be different from this illustration.
 STEP 6:
Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
 STEP 7:
Turn on the high pressure washer (I/
ON).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.
ƽ WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
Always test an inconspicuous area
before cleaning with high pressure.
 This nozzle features a 0º pencil jet
which rotates 360º for maximum dirt
cutting action, effectively increasing
cleaning performance up to 50%. This
nozzle combines the cleaning perfor-
mance of a 0º pencil jet with the sur-
face coverage of a wide angle nozzle.
Not recommended for soft materi-
als, siding, painted surfaces,
decks or autos.
USING THE ACCESSORIES
Dirtblaster®