Karcher G 2600 VH User Manual

Page 10

English

The color-coded quick connect nozzles provide a
wide array of spray widths from 0° to 65° and are
easily accessible when placed in the convenient
nozzle holder.

For particularly stubborn accumulation of grime.
Not recommended for soft materials like sidings,
decks, painted surfaces, cars.

For dirt accumulation over a large surface.

For moderate dirt accumulation over a large sur-
face.

For operating with detergent or cleaning with low
pressure.

WARNING

High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.

Make sure you hear a ‘click’ when inserting
the nozzle tip into the wand.

Pull the nozzle to make sure it is seated prop-
erly before operating your unit.
(See ASSEMBLY INSTRUCTIONS: Step 9 )

WARNING

To avoid serious injury never point spray noz-
zle at yourself, other persons or animals.

Detergents can only be applied with the black
detergent nozzle.

STEP 1:
Install the black detergent nozzle for deter-
gent application (will work at low pressure
only).

STEP 2:
Fill the detergent tank with Kärcher detergent.
Close the detergent tank with the detergent
metering valve.

STEP 3:
Adjust the detergent metering valve to the de-
sired dosage

STEP 4:
With the engine running, pull trigger to oper-
ate unit.
Liquid detergent is drawn into the unit and
mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on surface.

STEP 5:
Always draw fresh water through the deter-
gent suction tube when the cleaning job is
done, to rinse/flush any remaining detergents
from the injection system.

For best results see Cleaning Tips for specific
information on how to clean different surfac-
es.

USING THE ACCESSORIES

Quick connect nozzles

0° spray angle = Red nozzle

25° spray angle = Green nozzle

40° spray angle = White nozzle

65° spray angle = Black detergent nozzle

WORKING WITH DETERGENTS