beautypg.com

Operating instructions – Karcher G 3200 XH User Manual

Page 8

background image

8 English

Be sure the machine is level when checking

the oil level. (Refer to the engines operating

manual for seasonal grades).

We recommend that the oil be changed after

the fi rst 5 hours of use, then once every 50

hours.

STEP

4:

Fill gas tank with unleaded gasoline.

Do not use leaded gasoline.

Do not add oil to the gasoline.

STEP

5:

Pull back the spring loaded collar at the high

pressure outlet and insert the high pressure

hose.

Release the collar and push the high pressure

hose until the collar clicks.

CAUTION

High pressure in quick connect area.

Risk of injury caused by improperly locked

high pressure hose.

Make sure you hear the "click" when inserting

the high pressure hose into the quick connec-

tion.

■ Pull the high pressure hose to make sure it is

seated properly before operating your unit.

STEP

6:

Connect garden hose to units`s water inlet.

WARNING

High pressure in quick connect area.

Risk of injury caused by improperly locked

high pressure hose.

■ Make sure you hear a "click" when inserting

the high pressure hose in to the quick con-

nection.

CAUTION

Engine Shipped without oil. Before starting

engine, fi ll with oil. Do not over-fi ll. Do not run

the engine with a high or low oil level as this

can cause engine damage.

If you have further questions regarding the

engine, please refer to the engine manual

included with the unit.

CAUTION

Never start engine while handlebar is folded.

CAUTION

Allow the engine to cool down before folding

down the handlebar for storage.

STEP

3:

Check oil level. Oil level should always be

between the "FULL" and "ADD" or "MAX" and

"MIN" marks on the dipstick as shown in the

picture below.

OPERATING INSTRUCTIONS

HOT!

FULL / MAX

ADD / MIN