beautypg.com

Overview, Symbols on the machine – Karcher HDS 2-3-12 C Ed User Manual

Page 8

background image

– 2

Figure 1
1 Support for spray lance
2 Manometer
3 Recess for detergent suction hose
4 Recessed grip (both sides)
5 Wheel
6 Connection for water supply with filter
7 Water supply set
8 O-ring set (for replacement)
9 High pressure connection
10 High pressure hose
11 Spray lance
12 Triple nozzle
13 Pouring vent for detergent
14 Steering roller with fixed position brake
15 Fuel sieve
16 Safety latch of the hand spray gun
17 Hand spray gun
18 Power supply
19 Tool bag
20 Pouring vent for fuel
21 Dosage valve for detergent
22 Operating field
23 Storage for hand spray gun
24 Step depression
25 Handle
26 Nameplate
27 Cover lock
28 Storage compartment for accessories
29 Burner
30 Recess for spray pipe
31 Cover
32 Backflow valve of the detergent infeed
33 Oil tank
34 Oil drain screw
35 Detergent suction hose with filter
36 Fuel filter
37 Fastening clamp
38 Hose (soft damping system) of the wa-

ter shortage safeguard

39 Water shortage safeguard

40 Sieve in the water shortage safeguard
41 Fine filter (water)

Figure 2
A Power switch
1 Indicator lamp for detergent
2 “Ready for use” indicator lamp
3 Fuel indicator lamp

The operating elements for the cleaning
process are yellow.

The controls for the maintenance and
service are light gray.

High-pressure jets can be dan-
gerous if improperly used. The
jet may not be directed at per-

sons, animals, live electrical equipment or
at the appliance itself.

According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
Caution
Always connect the system separator to the
water supply, never directly to the appliance!

Overview

Device elements

Operating field

Colour coding

Symbols on the machine

Risk of electric shock!
Only electricians or authorised
technicians are permitted to
work on parts of the plant.
Risk of burns on account of hot
surfaces!

Risk of poisoning! Do not
breathe in the exhaust fumes.

8

EN