Karcher K 3-49 M Plus - Manual (Page 4)

4
English
WARNING!
When using this product basic
precautions should always be
followed, including the following:
„ Read all the instructions before us-
ing the product.
„ To reduce the risk of injury, close su-
pervision is necessary when a prod-
uct is used near children.
„ Know how to stop the product and
bleed pressures quickly. Be thor-
oughly familiar with the controls.
„ Stay alert – watch what you are do-
ing.
„ Do not operate the product when fa-
tigued or under the influence of alco-
hol or drugs.
„ Keep operating area clear of all per-
sons.
„ Do not overreach or stand on unsta-
ble support. Keep good footing and
balance at all times.
„ Follow the maintenance instructions
specified in the manual.
„ This Product Is Provided With A
Ground Fault Circuit Interrupter Built
Into The Power Cord Plug. If Re-
placement Of The Plug Or Cord Is
Needed, Use Only Identical Re-
placement Parts.
„ Risk of Injection or Injury – Do Not
Direct Discharge Stream At Per-
sons.
„ High pressure jets can be dangerous
if misused. The jet must not be di-
rected at persons, animals, electrical
devices, or the machine itself.
„ Wear safety goggles.
„ Do not use acids and solvents in this
product. These products can cause
physical injuries to the operator and
irreversible damage to the machine.
„ To reduce the risk of electrocution,
keep all connections dry and off the
ground. Do not touch plug with wet
hands.
„ The Trigger Gun Safety Lock PRE-
VENTS the trigger from accidentally
being engaged. This safety feature
DOES NOT lock trigger in the ON
position.
„ Do not use extension cord with this
unit.
ƽ WARNING
Do not spray electrical apparatus and
wiring.
Do not use with flammable liquids and
toxic chemicals.
Injection hazard: equipment can cause
serious injury if the spray penetrates the
skin. do not point the gun at anyone or
any part of the body. In case of penetra-
tion seek medical aid immediately.
This system is capable of producing
12400 kPa /1800 PSI to avoid rupture
and injury, do not operate this pump
with components rated less than
12400 kPa /1800 PSI working pressure
(including but not limited to spray guns,
hose and hose connections).
Before servicing, cleaning or removing
any parts, shut off power and relieve
pressure.
IMPORTANT SAFETY INSTRUCTIONS