Karcher K 5-68 MD Plus - Manual (Page 6)

6 English
 STEP 1:
Insert wheels into the body of the unit.
 STEP 2:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
 Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
 STEP 1:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
 STEP 2:
Install the supplied connector to the
unit’s water inlet.
 STEP 3:
Screw the supplied garden hose con-
nector on to the end of your garden
hose.
 STEP 4:
Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS