Karcher K 3-690 - Manual (Page 8)

8
English
 STEP 1:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
 STEP 2:
Install the supplied connector to the
unit’s water inlet.
 STEP 3:
Screw the supplied garden hose con-
nector on to the end of your garden
hose.
 STEP 4:
Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.
 STEP 5:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
 STEP 6:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a receptacle.
Press RESET button, indicator
should be “ON”.
Press TEST button, indicator should
be “OFF”.
Press RESET button for use.
We recommend that you test the
GFCI as part of your startup proce-
dure each time you use your pres-
sure washer. To learn how to peform
this test on your unit, visit http://
www.karcherresidential.com/
gfci_test.php for detailed instructions
for your type of GFCI.
OPERATING INSTRUCTIONS