Karcher BD 530 Bp - Manual (Page 8)

8
English
1 Water quantity regulator
2 Switch for brush operations
3 Switch of suction turbine
4 Display
Î Fasten the pushing handle using the
four screws that have been delivered
and fit the protective caps.
Î Place long lateral boards of the pack-
aging as a ramp next to the pallet.
Î Fix the ramp on the pallet with nails.
Î Place short boards as a support un-
derneath the ramp.
Î Remove the wooden bars in front of
the wheels.
Î Raise the cleaning head and remove
the cartonage.
Î Push down the appliance through
the ramp from the pallet.
Î Insert the vacuum bar into the vacu-
um bar suspension in such a manner
that the profiled sheet is positioned
above the suspension.
Î Tighten the cross-handles.
Î Insert the suction hose.
The disc brush must be installed before
the initial operation (see "Maintenance
work").
Please observe the following warning
notes when handling batteries:
Operator console
Before Startup
Unloading
Installing the Vacuum Bar
Install the brush
Batteries
Observe the directions on the
battery, in the instructions for
use and in the vehicle operat-
ing instructions
Wear eye protection
Keep children away from acid
and batteries
Danger of explosion
Fire, sparks, naked flames and
smoking must be strictly avoid-
ed