Karcher K 2-29 - Manual (Page 6)

6 English
Î STEP 1:
Insert wheels into the body of the unit.
Î STEP 2:
Install the supplied connector to the
unit’s water inlet.
Note: Never attach the garden hose
connector to the unit’s water inlet!
Î STEP 3:
Fasten the quick connector for the
high pressure hose to the high pres-
sure outlet.
Î STEP 4:
Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Î Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
Î STEP 1:
Insert the high pressure hose tightly
into the quick coupling on the appli-
ance, it will lock in audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
Î STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
ASSEMBLY
INSTRUCTIONS
OPERATING
INSTRUCTIONS