beautypg.com

Preparatory operations, Insert the adapter into the casing, Illustration – Karcher K 2-26 M T50 User Manual

Page 4: 1 take the adapter into the opening of the casing, Note, Cleaning surfaces, Connect wand with t-racer, 2 tighten the union nut, Connect trigger gun with wand, Tips for cleaning

background image

English

Insert the adapter into the casing.
Illustration
1 Take the adapter into the opening of

the casing.

2 Turn the adapter clockwise until it

snaps into place.

Note
Onetime installation. The adapter can-
not be unlocked anymore.

Connect the T-Racer and the wand with
the trigger gun.
Illustration

Connect wand with T-Racer.

1 Press the bayonet connection into

the bayonet catch, then turn by 90°
until it locks into place.

2 Tighten the union nut.

Connect trigger gun with wand.

1 Press the bayonet connection into

the bayonet catch, then turn by 90°
until it locks into place.

2 Tighten the union nut.

The T-Racer is not suited for scour-
ing or scrubbing.

Note: Outdoor surfaces should be
swept before the T-Racer is used to
avoid damaging the nozzles.

Guide the T-Racer over the surface
without effort.

Illustration

Caution

Do not run over freestanding corners.

ƽ

Caution

Do not reach under the edge of the
T-Racer while the device is in opera-
tion.

Pressure washer does not build up

the pressure or is vibrating.

Dismantle the nozzles, check the

nozzles for damage, rinse the T-Rac-

er with clean water then reinstall the

nozzles.

Illustration

1 Remove the clip.

2 Pull out the high-pressure nozzle.

Rinse the high-pressure nozzle with

clean water, replace if necessary.

3 Insert the nozzle.

4 Re-insert the clip.

You can use the extension tube with any
Kärcher accessory.

Use a moist cloth and clean the appli-

ance after use.

Store the appliance in a frost free area.
The device can be suspended into the
KÄRCHER organizer for storage.

The appliance is maintenance free.

In the U.S. or Canada, please call
1-800-537-4129 for warranty issues and
visit www.karcher-help.com for techni-
cal support and product assistance.

Call: 01-800-024-13-13 for help or visit
our website: www.karcher.com.mx

Preparatory operations

Cleaning surfaces

Tips for cleaning

Troubleshooting

Cleaning the high-pressure

nozzle

General notes

Tip

Maintenance and care

Care

Maintenance

Customer Support

USA and Canada

Customer Support Mexico

4

EN