Karcher BR 40-25 C Bp Pack - Manual (Page 27)

– 11
 Empty the dirty water reservoir.
 Press the appliance down using the
push handle.
 Turn the running gear to the front with
your foot.
 Turn the button for setting the advance
speed in – direction.
 Raise the disk brushes.
 Turn the disk brushes through approxi-
mately 45°.
 Remove the disk brushes downwards.
 Insert the new disk brushes in reverse
sequence.
 Set the advance speed.
 Turn the running gear to the rear with
your foot.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
In case of danger of frost:

Empty the fresh and dirt water reser-
voirs.
 Store the appliance in a frost-protected
room.
ƽ
Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any works on the
appliance.
Place the appliance on a stable, even sur-
face and disconnect the battery.

Drain and dispose of the dirt water and
the residual fresh water.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Replacing the disk brushes
Maintenance contract
Frost protection
Faults
27 EN