Karcher SC 6-800 C - Manual (Page 22)

– 10
Jagged, angled areas that can be sprayed
with water, such as:
– hard crusts, dirt that has settled in grout
and corners, soap scum, light lime
scale
Objects / surfaces, for example:
– Bathroom fixtures, interior window
frames (not wooden frames), bathroom
shelves, stove burners, shower stalls,
drains
 Set selector switch to the required
steam volume.
 While operating the steam switch, al-
ways direct the steam gun at a separate
piece of cloth until the steam is emitted
evenly.
 Rotate the switch to the OFF position to
turn off the appliance.
 Disconnect the mains plug from the
socket.
 Press the cover of the appliance con-
nector to the bottom and disconnect the
steam plug from the appliance connec-
tor.
 Empty the residual water from the water
reservoir.
Illustration -
 Store the power nozzle and the round
brush in the accessory compartment.
 Insert the manual nozzle onto each ex-
tension pipe.
 Put the extension pipes into the large
acessory holders.
 First, insert the extension and then the
point spray nozzle into the accessories
compartment.
 Hook the floor nozzle into the parking
position.
 Wrap the steam hose around the exten-
sion pipes and insert the steam pistol
into the floor nozzle.
 Stow away the mains cable in the ac-
cessory holder for the mains cable.
It is recommended to sweep or vacuum the
floor prior to using the steam cleaner. This
way, the floor is already cleared of dirt/
loose particles prior to the wet cleaning.
Prior to treatment with the steam cleaner,
always check the reaction of the textiles in
an inconspicuous location: Steam at first,
then let dry and then check for colour or
shape changes.
When cleaning painted or plastic-coated
surfaces, as found on kitchen and living
room furniture, doors, parquet; wax, furni-
ture polish, plastic surfaces or paint can
come loose or stains can be created. When
cleaning these surfaces, briefly steam a
cloth and wipe the surfaces with it.
Caution
Never direct the steam jet at glued edges
as the edge band may loosen. Do not use
the steam cleaner on unsealed wooden or
parquet floors.
In case of low outside temperatures, espe-
cially in the winter, warm up the window
pane by slightly steaming the entire glass
surface. This will prevent tensions on the
surface which might lead to glass break-
age.
Then clean the window surface with the
hand nozzle and attachment. Use a squee-
gee to remove the water or wipe the surfac-
es dry.
Caution
Do not direct steam onto the sealed loca-
tions of the window frame to prevent dam-
age.
Steam level 5 – Vapohydro function
Adjusting the steam quantity
Turning Off the Appliance
Storing the Appliance
How to Use the Accessories
Important application instructions
Cleaning floor surfaces
Refreshing textiles
Cleaning of Coated or Lacquered
Surfaces
Cleaning of Glass
22 EN