Karcher PW 20 - Manual (Page 11)

– 4
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
5.957-978
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2012/04/01
Technical specifications
1.735-
120.0
Working width of brush mm 290
Working width of noz-
zle mm 330
Brush diameter mm 70
Casing height mm 120
Handle height mm 830
Brush motor V 220-240
Frequency Hz 1~ 50/60
Power W 70
Spray pressure (max.) MPa 2,5
Temperature of the
cleaning solution
(max.)
°C 50
Brush speed (on carpet) 1/min 1500
Type of protection
-- IPX4
Protective class -- I
Cable length m 10
Power cord: Order No. -- 6.903-
226.0
Mains cable: Type: -- H05VV-F
3x1,5 mm
2
Casing material -- Cast alu-
minium
Typical operating
weight kg 9,2
Ambient temperature °C +5...+40
Values determined as per
EN 60335-2-68
Sound pressure level
L
pA
dB(A) 56
Uncertainty K
pA
dB(A) 1
Hand-arm vibration
value m/s 2 <2,5
Uncertainty K m/s 2 0,2
EC Declaration of Conformity
Product: Spray extraction accessory
device
Type: 1.735-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 1997+A1: 2001+A2: 2008
EN 60335–1
EN 60335–2–68
EN 61000–3–2: 2006+A1: 2009+A2: 2009
EN 61000–3–3: 2008
EN 62233: 2008
Applied national standards
-
CEO Head of Approbation
11 EN