Operations maintenance and care – Karcher T 9-1 Bp User Manual
Page 9

English
9
ṇ
Warning
Do not drive the rotating brushes over the
mains cable! Carry the appliance over
steps and high thresholds!
Î
Switch on/off the electrical suction
brush using the switch at the handle.
First pick up the larger parts such as cloth
pieces, paper, etc. from the floor. You will
thus avoid a blockage of the brush roller.
Note
You have to work with the brush roller
switched off if you want to vacuum clean
high-flounce carpets, carpet edges, animal
skins, etc.
ṇ
Warning
Pull out the mains plug before doing any
maintenance or cleaning jobs!
ṇ
Warning
Never immerse the electrical suction brush
in water or any other liquids while cleaning!
Î
Cut hair and threads that have got
wound on the brush roller using a pair of
scissors or just remove them.
If the rollers of the ESB 28 become difficult
to move:
Î
Insert a screw driver into the inlet incli-
nation and prise out the rollers.
Note
While prising, hold your had over the roller
so that the roller doesn't jump off.
Î
Remove hair or threads that have
wound over the axes of the rollers.
Î
Re-insert the rollers and ensure that
both the axes have locked in properly.
Î
Loosen the locking hook using a screw-
driver and remove the front hood.
Î
Turn the electrical suction brush and re-
move the housing lid.
Î
Dismantle the brush roller.
Operations
Maintenance and care
Cleaning the brush roller
Cleaning the rollers
Replacing the brush roller