Karcher B 60 W - Manual (Page 16)

- 7
Accessories
BR appliances B 60 W Ep (brush roller accessories)
Description Part no.:
Working width
550 mm Description
Packaging unit Appliance requires
Brush roller, red (medium, standard) 4.762-393.0 Also for regular cleaning of heavily dirtied
floors.
1 2
Brush roller, white (soft) 4.762-409.0 For polishing and cleaning sensitive floors. 1 2
Brush roller, orange (high/ low) 4.762-410.0 For scrubbing structured floors
(safety tiles, etc.).
1 2
Brush roller, green (hard) 4.762-411.0 For thoroughly cleaning heavily dirtied
floors and for removing the coating
(for e.g. of wax, acrylate).
1 2
Brush roller, black (very hard) 4.762-412.0 1 2
Pad roller shaft 4.762-415.0 For intake of roller pads. 1 2
Roller pad, white (very soft) 6.369-735.0 For cleaning and polishing sensitive floor-
ings.
20 80
Roller pad, yellow (soft) 6.369-732.0 For polishing floors. 20 80
Roller pad, red (medium) 6.369-734.0 For cleaning slightly dirtied floors. 20 80
Roller pad, green (hard) 6.369-733.0 For cleaning normal to heavily dirtied floors. 20 80
BD appliances B 60 W Ep (disk brush accessories)
Description Part no.:
Working
width 510 mm Description
Packaging unit Appliance requires
Disk brush, natural (white) 4.905-027.0 For polishing floors. 1 1
Disk brush, white 4.905-028.0 For polishing and cleaning sensitive floors. 1 1
Disk brush, red (medium, standard) 4.905-026.0 For cleaning slightly dirtied or sensitive floors. 1 1
Disk brush, black (hard) 4.905-029.0 For cleaning heavily dirtied floors. 1 1
Driver plate pad 4.762-534.0 For intake of pads. 1 1
BR/BD appliances B 60 W Ep (vacuum bar accessories)
Description Part no.:
Working width
850 mm Description Pack-
aging
unit Appli-
ance re-
quires
Rubber lip, blue 6.273-213.0 Standard pair 1 pair
Rubber lip, transparent, grooved 6.273-207.0 oil-resistant pair 1 pair
Rubber lip, transparent 6.273-229.0 Non-scarring pair 1 pair
Rubber lip, transparent 6.273-290.0 For difficult floors pair 1 pair
Vacuum bar, straight 4.777-401.0 Standard 1 1
Vacuum bar, bent 4.777-411.0 Standard 1 1
16 EN